Technical Specifications:
· Frequency characteristics: 20 Hz-20 kHz +1 dB, -3 dB @ + 4 dBu, 600 Ω (minimum level with gain control)
· Total Harmonic Distortion: 0.1% (THD + N) @ + 14 dBu, 20 Hz-20 kHz, 600 Ω (maximum level with gain control)
· Hum and noise: (20 Hz-20 kHz) 1
· Input Gain = Maximum
· Input attenuation = OFF
· Input sensitivity = -60 dBu-128 dBu
· Equivalent Input Noise (Channel 1 ~ 24 (MG32 / 14FX) / Channel 1 ~ 16 (MG24 / 14FX)) - 99 dBu
· Residual output noise (ST, MONO OUT, AUX, EFFECT, GROUP OUT) -83 dBu (87 dB S / N) nominal level ST, MONO, GROUP
· Master fader; send all channels switch is set to Off. -78 DBu (82 dB S / N) AUX nominal level
· Master Control; smallest electric mixer control for all the usual channels.
-64 DBu (68 dB S / N)
Nominal level of ST, GROUP Master fader and a channel fader.
(Channel 1 ~ 24 (MG32 / 14FX) / Channel 1 ~ 16 (MG24 / 14FX))
· Mono / stereo input 44 dB variable gain control
· Mono high-pass filter 80 Hz 12 dB / octave
· Channel input attenuator 0 dB / 26 dB
· Crosstalk (1 kHz): -, between each input channel 70 dB; -70 dB, between the input / output channels (CH INPUT)
· Mono input channel equalization:
· Biggest change range: 3 ± 15 dB HIGH (high) 10 kHz gradient
· MID (in) 0.25-5 kHz peaking
· LOW (low) 100 Hz gradient
· Stereo Input Channel Equalization:
· Biggest change range: 3 ± 15 dB HIGH (high) 10 kHz gradient
· HI-MID (high - medium) 3 kHz peaking
· LO-MID (low - medium) 800 Hz peaking
· LOW (low) 100 Hz gradient
Internal digital effects: Effect 1: 16 program, parameter control; Effect 2: 16 program, parameter control
TAP DELAY control, foot switch (TAP)
· Mono low-pass filter 80 - 120 Hz 12 dB / octave
· Mono / stereo input peak indicator for each channel, a red indicator light. When the rear lights balanced signal level reaches +17 dBu.
· Mono / stereo input signal a green LED indicator for each channel. When the rear lights balanced signal level reaches -10 dBu.
· Level meter: four 12:00 LED Indicator [stereo (L, R), PFL / AFL, GROUP (1 - 4)]
Peak Point: Red lights + 5 + 3 + 1 and 0:00: Yellow lights -1, -3, -5, -7, -10, -15, -20: the green light
· Virtual DC +48 V power supply
Power supply: 230 V AC, 50 Hz
· Power consumption MG32 / 14FX: 120 W, MG24 / 14FX: 100 W
· Maximum size (W × H × D) MG32 / 14FX: 1027 × 140 × 551 mm, MG24 / 14FX: 819 × 140 × 551 mm
Weight MG32 / 14FX: 22 kg, MG24 / 14FX: 18.5 kg

Features
1.32 input channels (MG32 / 14FX) / 24 input channels (MG24 / 14FX)
2.24 Microphone +4 stereo line input (MG24 / 14FX) / I6 Mike
3 wind +4 stereo line input (MG24 / 14FX).
4. l4 bus (stereo, 4 grouping, six auxiliary, two effects)
5 low-noise, high-precision mic preamps
6 phantom power switch and plug-in input / output
7.3 central band channel EQ (center frequency scanning) and HPF
8 lights ON / OFF switch o
9 dual SPX digital effects
10.-channel output can scan LPF
11 intercom input